Komfort Kooler systems utilize the natural cooling effect of evaporation
to combat seasonal dips in production caused by heat stress. Efficient
cellular water media can achieve temperature reductions up to 20 degrees
depending on temperature and humidity conditions. AP offers two
different styles of Komfort Koolers. The Closed Top System has been the
industry's favorite for many years. Made of ultraviolet stabilized PVC,
this system offers great durability and longevity. In addition, a new
and rapidly growing Open Top System is available. This design offers
easy access to manage and maintain the evaporative cooling system and
utilizes a combination of PVC and high quality stainless steel for years
of dependable operation. Komfort Kooler systems can be adapted to most
new and existing production facilities. Automated Production Systems can
assist you in correct sizing and placement and give you a realistic
expectation of the effectiveness of evaporative cooling in your climate. |
  |
Closed Top System
The Closed Top system is extruded from ultraviolet stabilized PVC for
durability and ease of installation. The hinge-open cover and
thumbscrews allows accessibility to the spray bar and holds pads firmly
in place. The spray bar bracket and water defector insure pads are
uniformly wet.
Open Top System
Made of high quality stainless steel, this system will give years of
dependable operation under the harshest conditions. The Open Top design
allows you to see the water jets and easily check water pressure. It
also offers access to the spray bar for cleaning. Pre-punched and heavy
duty stainless steel components help simplify installation. |
| |
Holding Tanks
(shown right)
A roto-molded holding tank offers increased water storage capacity. The
submersible pump keeps water levels consistent for efficient water
delivery. Unevaporated water flows back to the holding tank to be
re-circulated and a float level and port automatically add water as
required.
Other Features Include:
• Both systems accommodate easy removal of pads for cleaning.
• Wide selection of cooling pads to choose from.
• Trough support brackets are optional for suspending system on
sidewall, and Center Feed Kits for you longer cooling systems are
optional. |
|
Water Troughs
(shown left)
AP's pre-formed square trough serves as a 3 gallon per lineal foot (44.8
liters per meter) water reservoir. Constructed of corrosion proof,
ultraviolet stabilized PVC components, the trough allows unevaporated
water to be recirculated back to the holding tank. A perforated tray
snaps to the trough to hold pads firmly in place. Injection molded end
caps and couplers speed installation.
|
