LIQUID FEEDING

Home Up Feedback Search Technical Support Stockyard News About us

 

     

 

DATAMIX MULTIFEEDER 5000

Skiold-Echberg is one of Europe's leading manufactures of Liquid feeding equipment.
Depending on feeding strategy, mix of herd and recipes, you will always have an optimum feed solution for your herd with Multifeeder 5000. Depending on need, you can choose amongst a norm-system, a phase system or one of our solutions for emptying the circuit pipes and mix-tanks.

NORM-SYSTEM

The Norm-system is understood as the traditional way in which a liquid feeding is installed. The feed remains in the pipe between feedings. In this type of system, the Multifeeder 5000 can calculate the quantity of the individual components resting both in the mixing tank and in all parts of the pipe-system. Thus the system is capable of compensating the various recipes. Depending on the present conditions under which mixing can take place, an optimal feed-mix will be reached. Multifeeder 5000 will always inform you exactly what is being fed and by itself adjust for changes in feed value and contents of liquid.

      

PHASE FEEDING

The basic principle in a phase-feeding system is that two separate mixing-tanks individually make up a recipe with a high respectively low content of protein. From each mixing tank a separate circuit is leading to the buildings. The pipes run parallel over the pens and through a feed-valve from each pipe these are connected to the drop pipe of each pen. As the two valves open simultaneously it is possible to mix the exact blend of protein, which is adjusted to the growth-phase of the pig. Next to profitability in feed consumption you will experience a considerable reduction in phosphorous and nitrogen of the manure.

PIPE CLEANING

Should you wish to minimize or eliminate the remnants in the pipe, you are offered 3 alternatives with Multifeeder 5000. By "pushing" the remnants the pipe can be emptied by the new mix (C). Alternatively you can choose to "push" the remnants with water (A) or by inserting a "mouse" as a partition between feed and water (B).

These 3 systems of emptying the pipes (maybe integrated with rest-tanks) offer you the possibility of distributing several blends without the problems of having remnants.